Picked up another GL1100 to part out

[bigguy]

I picked up another GL1100 to part out and this one has a great Fairing tank cover saddle bags and trunk - normally I just sell on eBay but these items are large and hard to ship. I would be willing to hang on to any part (Including the motor) for a few months with a 50% retainer.
Check out the pictures on Kijiji - you can use the view posters other adds link to view the seat mufflers and other adds I have posted there

https://stcatharines.kijiji.ca/c-cars-ve ... Z381237443

and here is a link to my eBay store

https://stores.ebay.ca/Marshville-Enterprises?_rdc=1

Looking for a trunk pad for a 1982 Aspy
I also have more than 600 motorcycle magazines from the 70's 80's and some from the 90's as well - there are a sampling of them lsited on eBay check it out and like all parts I give members of these forums a discount. the magazines that are listed in groups of 12 I would let go for $1.00 each plus actual shipping charges.

 

[bigguy]

I'm looking for a trunk pad for a 1982 Aspy. I would take whole trunk if reasonable

 

[Anonymous]

I'm looking for a trunk pad for a 1982 Aspy. I would take whole trunk if reasonable

Sorry out of trunks right now -

 

[Anonymous]

Anyone interested in a carburetor core? Comes with (most) of the parts. A good buddy of mine had these sitting around collecting dust so i bought them thinking some of you guys might need Carb Parts

Not sure what its worth but I would like to get $40.00 for them

PM me if you are interested

 

[Anonymous]

Anyone need some Ram? $5 each plus $2.00 shipping 512 Meg 400Mghz Have 4 sticks available 2 sell in pairs

Also have a Camera works well I never got around to buying upgraded ram $10.00 plus $10.00 shipping

Much more solid than my new one that I bought, dropped, and replaced, !!

 

[G George]

I need a rear master cylinder for a 83 gl1100 aspy.
Do you have one??
Also i need an ignition switch for same, the one on your site for an 83 has 2 sets of wires with 1 red and 1 brown end.
Mine has 1 single set of wires with a bigger black plug.
G George

 

[Anonymous]

Item number 6 in the picture below is a trasmission cover change switch - is that to indicate the gear posistion and if so why is it on an Interstate?

 

[AApple]

My '81 does not have that particular switch, but it was used in later models...from what I have learned here.

 

[dan filipi]

Item number 6 in the picture below is a trasmission cover change switch - is that to indicate the gear posistion and if so why is it on an Interstate?

All the 1100's have that switch. Only the Aspencade would have the switch that indicated what gear it was in, the others would indicate neutral and OD.

 

[AApple]

Oh contrare, mon frere.... :mrgreen:
My 1100 don't have that switch. The pic from DSL shows the switch that bolts into the front cover.
Check out Roady's pic...his says that that particular switch is only on the '82-'83s....
As far as Aspys or not, I ain't got a clue, but yer prolly right...the Aspys indicated each individual gear, but the Innerstate/Standard only showed Neutral?

I'm just sayin.... :blush:

 

[dan filipi]

Yeah now I think of it the 80-81 has the block mounted neutral switch which doesn't heat up an od light cuz they ain't got's one.
The switch in your pic above is a dual action neutral/od.

 

[Anonymous]

Yeah now I think of it the 80-81 has the block mounted neutral switch which doesn't heat up an od light cuz they ain't got's one.
The switch in your pic above is a dual action neutral/od.

:read: That makes sense :read: (I should'a known that)

 

[Anonymous]

Oh contrare, mon frere.... :mrgreen:
My 1100 don't have that switch. The pic from DSL shows the switch that bolts into the front cover.
Check out Roady's pic...his says that that particular switch is only on the '82-'83s....
As far as Aspys or not, I ain't got a clue, but yer prolly right...the Aspys indicated each individual gear, but the Innerstate/Standard only showed Neutral?

I'm just sayin.... :blush:

Joel what program do you use to add the text and pointers to pictures

 

[AApple]

I don't....that pic came from Roady's most excellent front engine renewal thread. I think this new puter I got has some software that has stuff like that, but I never use it....too complicated fer me. I just use MS Paint....

 

[Anonymous]

got a set of GL1100 Carbs for sale - they are siezed and will need to be rebuilt

i do have them listed on eBay at $89.00 would take $50.00 plus shipping from guys on this site

This is the Canada Post site if you want to check out the shipping costs - my Postal Code is L0S1V0 be sure you change the dimensions from CM to inches and from Kilo's to pounds
https://www.canadapost.ca/cpotools/apps/ ... ution=e1s1

16 X 13 X 7 Inches 13 pounds

 

[Anonymous]

Cleaing out odds and ends
I have two GL1000 Carbs both are in pieces looks like I have most if not all the parts I have previously listed them for $40 I would take $40 for both sets.

https://www.canadapost.ca/cpotools/apps/ ... ution=e1s1

This is the Canada Post site if you want to check out the shipping costs - my Postal Code is L0S1V0 be sure you change the dimensions from CM to inches and from Kilo's to pounds

20 X 14 X 9 inches 25 lbs

 

[slabghost]

Man that's a tough deal to pass up but I must. I already have 3 spare carb racks.

 

[Anonymous]

Still cleaning up odds and ends - all items shown in both pictures are included - mostly GL1000 Brake parts

$45 plus shipping

https://www.canadapost.ca/cpotools/apps/ ... ution=e1s1
This is the Canada Post site if you want to check out the shipping costs - my Postal Code is L0S1V0 be sure you change the dimensions from CM to inches and from Kilo's to pounds

12 X 9 X 6 inches 13 lbs

 

[Anonymous]

Man that's a tough deal to pass up but I must. I already have 3 spare carb racks.

:smilie_happy: Ya but just think - you will be the first guy on your block to have 5 spare carb racks !! :music:

 

[backlander]

I'll have to keep this in mind, I'm going to look at a 75 basket case tomorrow with 55k on clock.