shocks

Classic Goldwings

Help Support Classic Goldwings:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
That`s a good question, from what I have read they are about a half to an inch taller but some are 12-12.5 same as the GL`s , I have also heard the bolt hole is larger and needs a little modification there.I was researching them ahwile back for another project but too tall for my needs.
I know the market is flooded with them and they are cheap because of that, most were pulled off right after purchase and swapped out for progressive springs.. Maybe it would be easier to get progressives for your existing shocks rather then chance a used set that may be too tall plus require modifications.
 
[url=https://www.classicgoldwings.com/forum/viewtopic.php?p=87279#p87279:1wzhymdu said:
mah1380 » Mon Jul 01, 2013 11:04 am[/url]":1wzhymdu]
they are for a harley davidson
Go check them out if your close by.Depending on your heigth 1/2 to 1 inch taller shouldn't be that much.I've been checking them out too.
 
Top