- Joined
- Dec 3, 2009
- Messages
- 22,406
- Reaction score
- 243
- Location
- Van Nuys Ca.
- My Bike Models
- 1983 Interstate
2018 KLR 650
2018 BMW S1000 RR
- My Bike Logs forum link
- https://classicgoldwings.com/forums/dan-filipi.122/
Thought I'd throw this out there, too many bike parts in the yard.
Pay shipping plus $25 and they are your's.
If I remember correctly the last set I sent to mcgovern61 I think that would be about $100 total.
(UPS makes all the money on this large stuff.)
These mufflers don't have the end baffles and the crossover has been cut and plugged off.
They were an experiment of mine to see how loud it would be without baffles and crossover removed.
Where the header pipe meets the muffler on the right side it was rotted out which I welded up.
Chrome is not great so painting them would probably be the best option.
I've seen baffles come up from time to time on Ebay so that might be an option or pick up a pair of the universals, unless you like loud then bolt them up and hit the gas.
Pay shipping plus $25 and they are your's.
If I remember correctly the last set I sent to mcgovern61 I think that would be about $100 total.
(UPS makes all the money on this large stuff.)
These mufflers don't have the end baffles and the crossover has been cut and plugged off.
They were an experiment of mine to see how loud it would be without baffles and crossover removed.
Where the header pipe meets the muffler on the right side it was rotted out which I welded up.
Chrome is not great so painting them would probably be the best option.
I've seen baffles come up from time to time on Ebay so that might be an option or pick up a pair of the universals, unless you like loud then bolt them up and hit the gas.
