4 inch pulley anyone?

OhioBill · Apr 11, 2012

I posted that I would like a pulley with a V-grove but tonight it occurred to me that the GL1000 uses a 10 MM bolt to attached the pulley to the crankshaft vs a 12MM for the GL1200. What is the inside diameter of the crankshaft hole of the V-grove pulley that you manufactured? I'm still interested in a pulley but needless to say, would want one with the correct crankshaft hole for my GL1000.

Thanks for your efforts,

n5mdvcolorado52 · Apr 12, 2012

dan filipi":35wxdaoe said:
I'm looking into having one or a few of the 4 inch crank pulleys machined.
No doubt I'll get a better price for quantity so anyone interested, do you want a pulley or can you machine it?

This pulley uses a 4 groove serpantine belt and will fit the 1200, 1100 and possibly the 1000 crankshaft.

DEPENDS ON PRICE, LET ME KNOW WHAT YOU FINALLY GET THEM DONE FOR ! I MIGHT BE INTERESTED.

oh2:

fysty-1 · Apr 12, 2012

Frank here is whar CB is asking. This is a quote from post # 426. "Firm price is going to be 85.00 shipped," Just contact either Countryboy or Chasrogers. Cheers Angela :Egyptian: :music: :music:

fysty-1 · Apr 12, 2012

OhioBill":1v4ho9nr said:
I posted that I would like a pulley with a V-grove but tonight it occurred to me that the GL1000 uses a 10 MM bolt to attached the pulley to the crankshaft vs a 12MM for the GL1200. What is the inside diameter of the crankshaft hole of the V-grove pulley that you manufactured? I'm still interested in a pulley but needless to say, would want one with the correct crankshaft hole for my GL1000.

Thanks for your efforts,

Just thought that I'd bump this question back up because I had asked it also before. Thanks Angela. :Egyptian: :Egyptian:

fysty-1 · Apr 12, 2012

chasrogers":2khnbkjq said:
ok angie i was appointed by dan to handle the orders of who wants what and how many thank you

Sorry Charles, this I did not know. Will these fit the 1200's? Angela :Egyptian: :Egyptian:

OhioBill · Apr 12, 2012

Can I get one made with the smaller hole for a GL1000?

countryboy843 · Apr 12, 2012

man this has been a busy week , i work a full time job at the machine shop and run a computer repair business on the side . if someone will get one for the 1200 if something doesnt match right we will get things worked out and get them right for the 1200 ( no cost for a rework pulley if the first doesnt work ) . i need to know the exact differences in the 1000 and 1100 and i can get those made , i dont have any access to one to compare

dan filipi · Apr 12, 2012

The pulley's look great!

Anonymous · Apr 12, 2012

Looks great ! cant wait to get mine !

Anonymous · Apr 12, 2012

Looks great ! cant wait to get mine !

OhioBill · Apr 12, 2012

I believe the only difference is the diameter of the crankshaft hole ( 10mm vs 12mm) but I do not have an 1100/ 1200 to compare to. Is there anyone out there who can perform the comparison?

joedrum · Apr 13, 2012

im iwas thinking that 1200 were the same as 1100s and only the 1000 is different ...i will see if i can figure it out ...im rather possitive there the same

dan filipi · Apr 13, 2012

OhioBill":3cckc9nj said:
I believe the only difference is the diameter of the crankshaft hole ( 10mm vs 12mm) but I do not have an 1100/ 1200 to compare to. Is there anyone out there who can perform the comparison?

That is not true. 1100 and 1200 are the same.
1000 is different.

Why is this even a question anymore!?

The pulley spec was originally drawn using a 1200 crank for the dimensions.
I had one made to the spec and it fit perfectly on my 1100.

dan filipi · Apr 13, 2012

So all this time and effort spent redesigning my WORKING pulley and picking it apart, what differences are there in this flat belt pulley your making?

joedrum · Apr 13, 2012

ouch quit picking on me and my pulley :smilie_happy: :mrgreen:

badorderbob · Apr 13, 2012

joedrum":3w3kdnay said:
ouch quit picking on me and my pulley :smilie_happy: :mrgreen:

opcorn: :rtfm: :doh: :whistling: opcorn: :smilie_happy: Gotta Get My Posts Count Up :laptop: :smilie_happy:

wilcoy02 · Apr 13, 2012

What is the counts on the v pulleys and flat pulleys? I have not seen my name on any lists yet? I put in that I wanted a v belt sometime in Feb. Let us know so we can plan our next actionand maybe an approx time when we might see the pulley.

dan filipi · Apr 13, 2012

wilcoy02":1ogutiog said:
What is the counts on the v pulleys and flat pulleys? I have not seen my name on any lists yet? I put in that I wanted a v belt sometime in Feb. Let us know so we can plan our next actionand maybe an approx time when we might see the pulley.

exmember here is keeping track.
I'm sure he'll see your post and add you to the list.

danf · Apr 13, 2012

I just sent my payment to Country for a serpentine type pulley, via paypal...

danf · Apr 13, 2012

wow.. :shock: does anyone have a make on a 3 rib belt, 30/3/4" where can I get one, for what vehicle, does anyone have this information...?

4 inch pulley anyone?

Help Support Classic Goldwings:

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Attachments

Well-known member

Anonymous

Guest

Anonymous

Guest

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Well-known member

Join the conversation!

Join today and get all the highlights of this community direct to your inbox. It's FREE!