Romans8
Member
Hi all, I'm new here. I recently was able to pick up a 1986 Aspencade that was sitting for a while. I've got it running pretty well and have enjoyed riding it a few hundred miles now. I'm having some issues with lugging/poor acceleration under 3000rpms. After that it pulls great. The Fuel System light is on as well as the code on the CFI for the TPS. I did the ohms test listed in the supplemental manual and don't get the required 4-6k ohms. So, I'm pretty sure i have a bad TPS.
I've read all the forum posts I can on modifying automobile TPS's for this application and might go that direction. I just wanted to check in here and see if anyone had any good new sources for a TPS for an 86 aspy, or new ideas for replacing/repairing the TPS.
Thanks for all the great info on this forum! I think I'm going to be referencing the collective knowledge here quite a bit!
I've read all the forum posts I can on modifying automobile TPS's for this application and might go that direction. I just wanted to check in here and see if anyone had any good new sources for a TPS for an 86 aspy, or new ideas for replacing/repairing the TPS.
Thanks for all the great info on this forum! I think I'm going to be referencing the collective knowledge here quite a bit!