GySgtBigdaddy
Member
I cannot remember how flush the starter sits! It isn't all the way flush and I'm not wanting to start it until I get some confirmation that it's all the way in. Is this right?
Correct Starter Seating
- Thread starter GySgtBigdaddy
- Start date
Help Support Classic Goldwings:
hmmm It must be good ... this is 1100 starter and motor right ...
- Joined
- Dec 3, 2009
- Messages
- 22,446
- Reaction score
- 265
- Location
- Van Nuys Ca.
- My Bike Models
- 1983 Interstate
2018 KLR 650
2018 BMW S1000 RR
- My Bike Logs forum link
- https://classicgoldwings.com/forums/dan-filipi.122/
As long as the front and rear bolts go in, it's good.
GySgtBigdaddy
Member
Its on a 82' GL1100. Sorry about not stating that. The holes line up so I'm going to finish things up and see about putting some miles on her! Thanks for the backup!
It looks good to go - enjoy the ride!!!
- Joined
- Dec 3, 2009
- Messages
- 9,284
- Reaction score
- 330
- Location
- Duncanville, Texas
- My Bike Models
- 1981 GL1100 Innerstate("The Turd")SOLD!!, 1996 GL1500 Innerstate
Looks good to me, too. If ti were not in the correct position, the bolts/holes would not line up. :good:
GySgtBigdaddy
Member
She's running like a champ!! For what it's worth, I bought the starter through EBay from Starter Central out of Memphis, TN. I read the post about starter problems and was worried but this one bolted right up without any problems. Thanks!
Excellent! Another success story!
cool :clapping:
