What did you do to your Wing today ?

[mcgovern61]

Polishing carb tops.......my Dremmel has become my NEW FRIEND! :clapping:

There are all kinds of Dremmel bits that make the job of removing spots and cleaning up the aluminium a snap! 10 minutes with the Dremmel and a brass wire wheel bit and all of the carb tops already look polished! :yahoo:

 

[krakum1967]

Finished putting body parts back on the bike, and getting it road ready. Ordered a set of iridium plugs and a new K&N Filter after I cancelled my Amazon order. He still had not shipped by this morning and I just dont have time to wait on a******* like that. Then he had the sack enough to tell me he was still within time limits for shipping out and denied the cancellation. I called Amazon, my money will be back in the account on Monday, and I am done with that nightmare. The K&N was pricey but it has the crankcase breather attachement, fits better in the space provided, will not require element replacement, and I will actually be able to use my tray too. The K&N will be in tomorrow morning. You just cant beat Oriellys for some things. Cant wait to get on to road testing.

I have a customers Honda Shadow to service today so I am a happy camper, quick easy 200 dollar day for me..Win Win!

 

[87 restore]

finished up with new leds in dash to go with new stereo also going to light up speakers and stick a few leds in the air ducts

 

[brianinpa]

Used it as a part delivery vehicle. Gerry now has the handle bar clamps he needed and I think I need to buy some new braided fuel lines...

 

[87 restore]

brianinpa » Sat May 31, 2014 9:10 pm[/url]":2nyrhhso]
Used it as a part delivery vehicle. Gerry now has the handle bar clamps he needed and I think I need to buy some new braided fuel lines...

yeah just a heads up on the braided fuel line if you buy the anodized covers that hide the clamps most likely will leak just spent the better half of a Saturday proving this point and had to repaint engine(and Yes they were as tight as I could get)

 

[mcgovern61]

brianinpa » Sat May 31, 2014 9:10 pm[/url]":18goc75m]
Used it as a part delivery vehicle. Gerry now has the handle bar clamps he needed and I think I need to buy some new braided fuel lines...

Thanks Brian!! It was great to see you again! :thanks:

 

[brianinpa]

mcgovern61 » Sat May 31, 2014 9:48 pm[/url]":3kxcrdg4]

brianinpa » Sat May 31, 2014 9:10 pm[/url]":3kxcrdg4]
Used it as a part delivery vehicle. Gerry now has the handle bar clamps he needed and I think I need to buy some new braided fuel lines...

Thanks Brian!! It was great to see you again! :thanks:

Same here Gerry. Next time we can ride the mountains of PA!

 

[brianinpa]

87 restore » Sat May 31, 2014 9:15 pm[/url]":2iusro9i]

brianinpa » Sat May 31, 2014 9:10 pm[/url]":2iusro9i]
Used it as a part delivery vehicle. Gerry now has the handle bar clamps he needed and I think I need to buy some new braided fuel lines...

yeah just a heads up on the braided fuel line if you buy the anodized covers that hide the clamps most likely will leak just spent the better half of a Saturday proving this point and had to repaint engine(and Yes they were as tight as I could get)

After looking at the set Gerry bought, he shamed me into realizing I need to buy some new ones. ops

 

[mcgovern61]

Water pump in, front cover, gaskets and O-rings replaced, engine painting going on in stages............. :builder:

 

[detdrbuzzard]

I gave my wing a much needed bath today

 

[Mysteryrider]

road mine to work then after a really short work day. (truck broke) gave it a bath then home ... a really nice day

 

[dan filipi]

Pulled the heads off the 1100 getting ready for my next project.

 

[backlander]

Degreased the front forks for Atila in the kitchen sink and caught myself laughing out loud, thinking it would take a special kind of woman to put up with my azz doing this kind of stuff. lmao

 

[Winger 82]

put 100 miles on her today, :music: :music: :music: :music: :moped:

 

[AApple]

Spent from 10am this mernin until 4pm givin the turd a much needed bath, and polishin. If I ever catch the sob that let it get that derty, Imma gunna whoop his butt.... :rant: :rant:

:whistling:

 

[tumunga]

Took it and the backrest on a mini tour through semi-northern Indiana. Back south to Carmel, and watched 8 million ways to die in the west. Hopped on the bike, rode through some springles, then back to the garage. Only 180 miles, but nice weather. Stopped at a farmer's market north of Westfield at 256th and US-31. I'll tell you what, I had a Old Fashioned loaf, on a wheat bun, with swiss, tomato, onion, pickle, mustard, and mayo. It was the best cold cut sandwich I've ever had.

 

[Omega Man]

dan filipi » Sun Jun 01, 2014 3:59 pm[/url]":3f8o6urx]
Pulled the heads off the 1100 getting ready for my next project.

opcorn: and what would that be?

 

[dan filipi]

Omega Man » Mon Jun 02, 2014 6:35 am[/url]":2odf24e3]

dan filipi » Sun Jun 01, 2014 3:59 pm[/url]":2odf24e3]
Pulled the heads off the 1100 getting ready for my next project.

opcorn: and what would that be?

The 1100 heads with early 1000 cams are going on the 1200.

 

[Omega Man]

LOL, you Mad Scientists!

 

[brianinpa]

I'm still looking at my 77 cams and thinking...