Finally finished my manifold...

[mjanderson]

I finally finished my single manifold. Now on to carb modifications and linkage. :BigGrin:

 

[dan filipi]

Oh that looks nice!

What are those 2 things clamped on to 2 runners?

 

[mjanderson]

I made the heating chamber removable. The clamps hold it to the bottom of the manifold plenum.

 

[dan filipi]

Cool.

 

[slabghost]

Looks good. Are you planning to use the solex or the weber with the adapter? If solex you may want to use a riser .

 

[mjanderson]

I'm going to be using the Weber 32-34 with the 2 to 1 adapter.

 

[slabghost]

Looks like a winner to me!

 

[mjanderson]

I hope so!

 

[Ansimp]

Well done :good:
Can't wait for the test run!
opcorn: opcorn: opcorn:

 

[sgq700]

Very Good !! :music2:

 

[Omega Man]

So these heating chambers are for coolant? I'm guessing here, I thought icing was cured with proper jetting?

~O~

 

[mjanderson]

I'll be working for optimal jetting but wanted to have the heating chamber in place in case instead of having to add it later. Some have said it helps with atomization/vaporization even when there is no icing problem.

 

[mjanderson]

Obviously there is nothing totally new here. Just copying the work of several here on the forum who have gone before me and adding my tweaks as needed. Thanks for leading the way!

 

[Ansimp]

mjanderson » Sun Mar 01, 2015 11:24 am[/url]":33twgkkm]
Obviously there is nothing totally new here. Just copying the work of several here on the forum who have gone before me and adding my tweaks as needed. Thanks for leading the way!

gallery/image.php?album_id=10052&image_id=25785&sk=t&sd=d&st=0

gallery/image.php?album_id=10052&image_id=25786&sk=t&sd=d&st=0

MJ if you just copy the thumbnail link from your photo in the album it will display the image in your post :yes:

Manifold #6

• mjanderson
• Feb 28, 2015

Manifold #7

• mjanderson
• Feb 28, 2015

[GALLERY=media, 25786[/album
I have left off the ] otherwise it will display your picture again :good:

 

[mjanderson]

Thanks. I tried to do that earlier but must have been doing something wrong. I'll try again next time.

 

[AApple]

:clapping: :builder: :builder: :good:

 

[Dusterdude]

What dimensions is the box

 

[rob.lafady]

Looks great!

 

[mjanderson]

Dusterdude » Sun Mar 01, 2015 6:23 am[/url]":1gyzkpt5]
What dimensions is the box

It is made of 2" x 2" square tubing. The bottom was narrowed down to 1 1/2" to accommodate the slant needed to match the intake elbows attached to the head.

 

[who444444]

Looks like it' going to work nice. :good: