I'm rebuilding a set of gl1100 carbs that will go back on a 79 gl1000 motor. Trying to set the float levels and checking results with the clear tube method. The question is, where should the fuel level in the bowl be? Is it like the keihin carbs on my cb750, where the level should be 2-3 mm below the float bowl seam?
I can set the float height to 15.5 mm according to the factory manual, but there is no mention of desired fuel level in the bowl.
Appreciate your help on this.
p.s. yes Joe, I know it will run better on just one super-modified progressive two-barrel carb, but I don't feel up to that yet :shock:
I can set the float height to 15.5 mm according to the factory manual, but there is no mention of desired fuel level in the bowl.
Appreciate your help on this.
p.s. yes Joe, I know it will run better on just one super-modified progressive two-barrel carb, but I don't feel up to that yet :shock: