Offcenter
Well-known member
Hey gang, where's the best place to buy head gaskets and valve cover gaskets for
my 76 gl?
Thanks guys.
my 76 gl?
Thanks guys.
Head gaskets? Valve cover gaskets?
- Thread starter Offcenter
- Start date
Help Support Classic Goldwings:
- Joined
- Jan 27, 2013
- Messages
- 9,855
- Reaction score
- 34
- Location
- Brisbane Australia
- My Bike Models
- 1981 GL1100 “Rats Nest”
1998 GL1500c Val
1987 CBR1000f “The Pig”
1991 CBR1000f Red
Western Honda if you want genuine :yes:[url=https://www.classicgoldwings.com/forum/viewtopic.php?p=146693#p146693:8zki9h2u said:
If your looking for factory parts allot of folks use western Honda, If you want aftermarket then any Vesrah top end kit will do, ebay or amazon have shown the best prices you just need to shop around, find the part number and type it into google.
What they said...
OP
OP
Offcenter
Well-known member
Ok guys, found this set for the top end.
At the bottom of the page, it shows the oil
seals for the cam shafts.
https://www.saber-cycle.com/store/product646.html
Does anyone know how many of these seals I need?
Two? Four?
Thanks!
At the bottom of the page, it shows the oil
seals for the cam shafts.
https://www.saber-cycle.com/store/product646.html
Does anyone know how many of these seals I need?
Two? Four?
Thanks!
- Joined
- Dec 3, 2009
- Messages
- 22,463
- Reaction score
- 275
- Location
- Van Nuys Ca.
- My Bike Models
- 1983 Interstate
2018 KLR 650
2018 BMW S1000 RR
- My Bike Logs forum link
- https://classicgoldwings.com/forums/dan-filipi.122/
I believe you need 3 of them if replacing them all?
1 at each cam gear, 1 at ignition end of left head.
Maybe someone can confirm this.
1 at each cam gear, 1 at ignition end of left head.
Maybe someone can confirm this.
Three is what you need, but... I wouldn't buy a glass of water from Sabre-cycle. Too many horror stories of bad customer service for me to even consider spending a dime there.
Not knowing the manufacturer I would pass on that, in the order I would purchase is Honda, Vesrah(VG-595), Athena. The athena can be bought for 70 something so buy where you know what your getting.
- Joined
- Dec 3, 2009
- Messages
- 22,463
- Reaction score
- 275
- Location
- Van Nuys Ca.
- My Bike Models
- 1983 Interstate
2018 KLR 650
2018 BMW S1000 RR
- My Bike Logs forum link
- https://classicgoldwings.com/forums/dan-filipi.122/
Good chance your local auto parts would have these seals.
Take one in and match up the part number or they might have a crossover.
It is just a seal.
Take one in and match up the part number or they might have a crossover.
It is just a seal.
There is no chance that I would put anything other than an OEM Honda head gasket on my bike. The valve cover gaskets can be had for pretty cheap on eBay.
I sent you a PM about my supplier. I will provide others with his contact information.
His name is Joseph F. Marks
His email is [email protected]
I purchase all of my OEM Honda parts from this supplier and he just sends me an invoice via PayPal.
Great service, prices, and I know I am getting genuine OEM Honda line parts for my vintage machines. It is really nice having a supplier like this to deal with.
Tell him Brian Trapp sent you...
I sent you a PM about my supplier. I will provide others with his contact information.
His name is Joseph F. Marks
His email is [email protected]
I purchase all of my OEM Honda parts from this supplier and he just sends me an invoice via PayPal.
Great service, prices, and I know I am getting genuine OEM Honda line parts for my vintage machines. It is really nice having a supplier like this to deal with.
Tell him Brian Trapp sent you...
