hooch getting a new fuel source

[joedrum]

pics

pic of grabar runners mounts to head ...with plywood spacers of 5/8"..that are milled out around plugs to have access ...and super stabilizer for the head mount sealing

pic of grab bar runner hook up to type 4 plenum...also shows plywood plate on top of type4 to mount 1 to 2 barrel transition piece ...that high rises dft 2 barrel carb away from plenum floor and with it narrow down to one barrel opening perfectly centers charge to runner outlets

i really like the front ride off stand all oldwings should have them

 

[ekvh]

That really is a wolf in sheep's clothing. I need to find or make a ride-off stand.

 

[Omega Man]

Yep, it's an official GoldWing sleeper! Go git'em Joe! :mischief:

 

[joedrum]

[video]https://www.youtube.com/watch?v=5Qb_dkFfnIE&feature=youtu.be[/video]

after going through the screws idle scews in reverse way from last video ... the fast idle screw is all the way backed off linkage ...and opening up idle mix scew 1/4 turn or less it appears to be really stable idle and i think all lopey and surging is dam near gone

:thanks:

 

[Steve83]

What first came to my mind was Bob Segar singing "Like A Rock"! I thought about posting the video, but we all know the song... Nice work, Joe - as usual!

 

[dan filipi]

Right back to a nice steady idle. Well done Joe.

Audio isn't the greatest but what I can tell the exhaust tone is even and steady.

 

[ekvh]

Idles well.

 

[joedrum]

ekvh » Sun May 18, 2014 5:17 pm[/url]":2gjawzk8]
Idles well.

i am trying to figure out a way to take ride video eric ... seems all ride videos only capture wind noise good ... i am really trying to solve this ..as some one needs to to put up something beside words ... ive never had to back up stuff i do with words as what i do needs no sales pitch so i am no good at it ....

i am not done till i get a video that speaks for itself period ... thats what wrong here ... all these bikes are just backed with blab ... ive done all i can to be away from that ... but so far the ride video with focas on gauges and good sound i havnt got figured out yet ... but thats my goal eric ... my hands are much better than my mouth ...seems most forums mouth rules ... i cant compete there and have no desire to ....video coming it is sure needed :thanks:

 

[Ansimp]

Sounds great Joe :good:

 

[ekvh]

With technology the way it is today,it's easy........if you know how the stuff runs. I have a hard time loading pics.

 

[joedrum]

yes if it wasnt for the help i get here i would be nowhere in pics and video eric .... i am about as bad as it gets ... :headscratch: :doh: :hihihi:

 

[pidjones]

I suggest putting a bandaid over the mic hole on the camera. Helped a bunch with wind noise on my camera!

Sent from my LePanII using Tapatalk 2

 

[slabghost]

pidjones » Mon May 19, 2014 5:53 pm[/url]":1y2v6h54]
I suggest putting a bandaid over the mic hole on the camera. Helped a bunch with wind noise on my camera!

Sent from my LePanII using Tapatalk 2

That sounds like a great solution! :thanks:

 

[joedrum]

well so far best mount i figure out was patty ...so maybe a two video with patty and band aid will be the deal... :hihihi: ..got a nice backrest mounted for her now

 

[mcgovern61]

Hey Joe, when i did this video, I used my 8mm video camera with a long strap around my neck so as to not lose the camera. I held it in my left hand and just speed shifted. (You gotta like it....caveman videography!!) :smilie_happy:

[video]https://www.youtube.com/watch?v=2SyhI7BDnhE[/video]

 

[joedrum]

i can not get out of the back yard ... i was going to do a video ride .....and i thought the camera was going to be the problem to handle ... :doh: :hihihi: wet ground

 

[joedrum]

[video]https://www.youtube.com/watch?v=M50y9Sa--7g&feature=youtu.be[/video]

nothing special but pulling holding video by hand for brief test in sound and picture ...

 

[mcgovern61]

Joe, that sounds GREAT!!!! :clapping: arty:


Sure sounds a lot better than my '81 did!! (For comparison....)

[video]https://www.youtube.com/watch?v=2SyhI7BDnhE[/video]

 

[dan filipi]

Sounds real good Joe.

What rpms /speed you running there?

 

[joedrum]

i tried to get that seems i was mostly just short of 4000 rpm thats right around 68mph area ..it seems to be about 4200 at 70mph about ... seems i am still in idle circuit cruising here ... sound quality seemed ok to me ... maybe worth trying to mount it now i dont like having only one hand on hooch at all LOL.... bike really sounds good to me ... the weber was just barely working