what did you do today

Classic Goldwings

Help Support Classic Goldwings:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Rode from Daytona beach to almost St. Augustine Fla. on hgwy A1A, light winds, bright sun, Atlantic ocean as the continuous mural to my right. Just a nice afternoon, lucky to be here.
 

Attachments

  • Screenshot_2023-01-20-21-55-49.png
    Screenshot_2023-01-20-21-55-49.png
    881.1 KB
Well today was good and bad...the Bills lost, maybe next time. Then there was the good...I didn't go down when my rear tire went flat at 55 on a 4 lane, and the guys behind me slowed down to let me swerve and sway my way to the side of the road. Not an experience I want to repeat...ever! Turns out the 90 degree valve stem that I wanted so bad ripped at the rim, just 2 minutes after I slowed down from 80! AAA got me home on a flatbed and now both wheels are getting new valve stems. I'll be insisting on the short rubber ones, nothing fancy.
Don't be jealous bunsteve, it'll take till tuesday to find a bike shop open to repair this. Contemplating trying to to put a new stem in without pulling the tire off myself.
 
Good on ya for keeping her upright! Flats are scary. Only a little bit jealous. Wife and I took a nice (car) ride to Vermont Country Store yesterday. The trees and mountains looked like they were frosted with that nice light whipped cream frosting my Mom used to make. Some parts were like driving in a white tunnel.
 
I have been leaving the top box off lately and decided to try a different look to make the bike lighter and cleaner. Got a spare luggage rack and cut the top box mount off. I like the look and shed 6 lbs. The stub handles are left to put bike on the centerstand.
I'll regret this next time I want the top box and have to do 45 minutes labor to put it back on!
 

Attachments

  • Screenshot_2023-01-20-21-56-43.png
    Screenshot_2023-01-20-21-56-43.png
    1.5 MB
  • Screenshot_2023-01-24-08-21-14.png
    Screenshot_2023-01-24-08-21-14.png
    985.3 KB
Putting a 2 barrel setup, and port and polished heads with 1000 cams,on this 82 1100,with the 1200swingarm and a 85 1200ccmotor.then 4 single exhaust about 3.5 ft,with upswepes,and diesel caps on exhaust..brother in law,helps and the 2 bottles of nos...where the shocks are,drilling carb for that's..small 3 to 5 lbs..it's a barhopper..lol
 

Attachments

  • 20230123_153522.jpg
    20230123_153522.jpg
    1.9 MB
  • 20230123_153537.jpg
    20230123_153537.jpg
    1.9 MB
  • 20230105_193327.jpg
    20230105_193327.jpg
    1.4 MB
  • 20230105_194225.jpg
    20230105_194225.jpg
    1.7 MB
  • 20230105_194239.jpg
    20230105_194239.jpg
    1.4 MB
  • 20230110_144931.jpg
    20230110_144931.jpg
    1.5 MB
  • 20230110_144910.jpg
    20230110_144910.jpg
    1.7 MB
  • 20230110_144833.jpg
    20230110_144833.jpg
    2.1 MB
  • 20230110_144904.jpg
    20230110_144904.jpg
    1.8 MB
You might want to consider taking advantage of the post on the back of the left cam and installing a Power Arc C5 ignition right there too, i dunno how it'll work with the nitrous, but you'll be able to use a much wider range of settings on the 2 barrel as well as making starting a whole lot easier.
 
Last edited:
roflmao. all that talk. how many NOS hits can the driveline take? those before you have said "plenty at 5%". lol
Because
roflmao. all that talk. how many NOS hits can the driveline take? those before you have said "plenty have you,done anything this..it's a first for me,but I don't give up,on purpose and don't need negative nelly,bud..

roflmao. all that talk. how many NOS hits can the driveline take? those before you have said "plenty at 5%". lol
Better to try and fail..to not try at all..and I might be wrong on nos..but a little goes a long way..it's a show bike..I ride a valkerie 98..
 

Attachments

  • 20230110_142659.jpg
    20230110_142659.jpg
    3 MB
Because



Better to try and fail..to not try at all..and I might be wrong on nos..but a little goes a long way..it's a show bike..I ride a valkerie 98..
I'm looking forward to your finished result. Just having nos available to try would be a hoot! ...and blowing up a motor if it comes to that. This is how we learn sometimes!
 

Latest posts

Top